Easy DIY Wooden Garbage Can Enclosure
Transform your outdoor space into a clutter-free oasis with a DIY wood garbage can enclosure. Not only does it hide unsightly trash cans, but it also provides a functional and stylish addition to your patio, deck, or backyard. Let's dive into this rewarding project that combines practicality and aesthetics.
Before you grab your toolbelt, consider the layout and size of your enclosure. Measure your trash cans to ensure a perfect fit, and decide on the design that complements your space best. We'll cover two popular designs: the classic Shiplap and the modern Slat & Plank. But first, let's gather our materials and tools.
Materials and Tools
Though the materials list may vary slightly depending on your chosen design, here's a general list to get you started:
- Fakultative: Wood glue, screws, or nails
- Inhibitor: Stainless steel or galvanized screws, hardware, and hinges
- Cutting: Circular saw, jigsaw, or miter saw
- Measuring & Marking: Tape measure, level, and pencil
- Sanding: Orbital sander and sandpaper (80-120 grit)
- Finishing: Exterior wood stain or paint and sealer
- Building: Lumber ( Pressure-treated, cedar, or composite )
Classic Shiplap Enclosure
The Shiplap design features interlocking boards that create a striking visual appeal. It's perfect for cabin-chic or farmhouse-style outdoor spaces. Here's how to build it:
- Cut the frame and back boards according to your measurements.
- Assemble the frame using glue and screws or nails.
- Install the back board.
- Cut the Shiplap boards to length.
- Install the Shiplap boards, leaving a 1/8" gap for ventilation and rain runoff.
- Attach the face frame and doors.
- optionally, add trim for a finished look.
Remember to predrill holes and countersink your screws or nails to prevent splitting. Sand any rough edges, then seal with an exterior wood stain or paint for longevity.
Modern Slat & Plank Enclosure
The Slat & Plank design offers a clean, modular look that fits well in contemporary spaces. Here's how to construct it:
- Cut the frame and face boards.
- Assemble the frame.
- Install the face boards and top slats, leaving gaps for ventilation.
- Cut the side slats and doors.
- Attach the side slats and doors, ensuring they slide smoothly.
- optionally, install a magnetic catch or latch for the doors.
Apply the same finishing steps as the Shiplap enclosure, taking care to seal the end grain of the slats to prevent water intrusion.
Installation and Maintenance
Once completed, your DIY wood garbage can enclosure can be anchored to the ground or mounted on casters for easy movability. To maintain your enclosure's longevity:
- Keep it clean and free of debris.
- Apply a fresh coat of sealer every 1-3 years, depending on your climate.
- Store trash cans and bags inside when not in use to prevent water damage and animal intrusion.
Embrace your newly transformed outdoor space, knowing that you've not only enhanced its appearance but also added a touch of functionality and sustainability through your DIY project. Happy building!